1. Design Your Neon Sign

Before you start assembling your silicone neon light strip into a sign, it's crucial to have a clear design in mind. You can use graphic design software like Adobe Illustrator or even simple drawing tools on your computer. Sketch out the shape, letters, or patterns you want your sign to feature. Consider the size of the sign based on where it will be installed. If it's for a storefront, you might want a larger, more prominent design, while a smaller, more intricate sign could be perfect for home decor or a small event.

When designing, keep in mind the flexibility of the silicone neon light strip. It can bend and curve, but there are limits. Try to avoid creating sharp angles that could damage the strip. Instead, use smooth, flowing curves for a more professional and visually appealing look.

Silicone Neon Light 

Strips: Choose the right size of silicone neon tape according to the size of the design drawing and You can choose from different colors such as classic red, blue, or go for a more modern multi - color (RGB) option if you want the ability to change the sign's color Or refer to the neon light color board below

Power Supply: Get a power supply that is compatible with the voltage requirements of your silicone neon light strip. Check the wattage of the strip and ensure the power supply can handle it. For example, if your strip has a high wattage due to its length, you'll need a more powerful power supply.

Mounting Materials: You'll need materials to mount the sign. This could be acrylic sheets, wooden boards, or metal frames. Acrylic sheets are a popular choice as they are lightweight, durable, and have a clear, sleek look. You'll also need screws, bolts, or adhesive to attach the light strip and the mounting material together.

Cutting and Bending Tools: A sharp pair of scissors or a utility knife to cut the silicone neon light strip to the right length. For bending the strip into the desired shapes, you can use a heat gun. Heating the strip slightly makes it more pliable, allowing you to shape it without breaking.

Cutting: Measure the length of the light strip needed for each part of your design. Use your cutting tool to make clean cuts at the marked intervals on the strip. Be precise with your cuts to ensure a proper fit when assembling the sign.

Bending: Use the heat gun to gently heat the section of the silicone neon light strip you want to bend. Hold the heat gun about 10 - 15 centimeters away from the strip and move it back and forth evenly. Once the strip becomes soft, carefully bend it into the shape you need. Let it cool in the bent position to set the shape. Repeat this process for all the curved parts of your design.

Prepare the Base: If you're using an acrylic sheet or a wooden board, clean the surface thoroughly to ensure good adhesion. Mark the positions where you'll be attaching the light strip on the base material according to your design.

Attach the Strip: You can use adhesive specifically designed for silicone to attach the light strip to the base. Apply the adhesive evenly along the back of the light strip and carefully press it onto the marked areas on the base material. Make sure the strip is firmly attached and lies flat. If you're using a metal frame, you may need to use screws or bolts to secure the light strip in place.

Wire Connection: Connect one end of the silicone neon light strip to the power supply. Make sure to match the positive and negative terminals correctly. If you're using an RGB light strip, there will be additional wires for color control. Follow the wiring diagram provided with the strip and the power supply to ensure proper connection.

Testing: Before finalizing the installation, test the sign by plugging in the power supply. Check if all parts of the light strip are illuminated as expected. If there are any dark spots or areas not working, double - check your connections and the power supply settings.

Edge Trimming: Once the sign is fully assembled and tested, trim any excess edges of the light strip or the mounting material to give the sign a clean, finished look.

Hanging or Mounting: Depending on your design, add hooks, brackets, or other hanging mechanisms to the sign if you plan to hang it on a wall. If it's for a tabletop or a flat - surface display, make sure it stands securely.